This door reader-controller is designed for organizations that need more than standard access control. The TVIP-FaceBio is a biometric reader-controller that not only recognizes faces, it also detects elevated temperature, and if a person is wearing a protective mask.
The reader-controller can prevent people with elevated body temperature or no mask from entering a secure area.
Features of Access Control Reader
- Face authentication range up to 6.5 feet
- Temperature Measurement range up to 2.5 ft
- Body temperature accuracy +/- 0.54 °F
- Stores & matches up to 22,400 face templates
- Mask detection
- 7-inch touchscreen display
- Recognizes faces in <500ms
- Dust-proof and water-resistant
- Connects an access controller (Wiegand)
- Audio announcements: verbal temperature normal, or high-level alarm, mask verification, and face recognition verification
Designed to Help Businesses, Hospitals, and Schools
This access control reader helps organizations control entry. It provides a way of screening people as they enter a secure area.
Its embedded face recognition sensor provides 100% hands-free hygienic user authentication.
Do you need more protection? The biometric reader detects if a protective mask is being worn. Users can be denied access if a fever is detected, or if the person is not wearing a mask.
Face Recognition Reader-Control System Diagram
Specifications for TVIP-FaceBio Door Reader
Face Recognition Distance: 0.5 m(1.6 ft)—2 m (6.5ft)
Access Control Software
|Hardware||8” Touch Screen Display |
2MP Camera with Color
0.01 lux, BW 0.001 lux
3D noise reduction, strong light suppression, electronic image stabilization, and has multiple white balance modes, suitable for various fields
|Access Control Interface||Relay|
Temperature Distance: up to 2.5 ft |
Temperature Accuracy: +/- 0.3 °C (+/- 0.54F)
Protective Mask Detection
TCP / IP (RJ45)
Wiegand Input / Output
Note that this biometric door reader can be connected directly to the network or through a controller. RS485 / RS232 Wi-Fi (Optional)
Working Temp.: 10C (50F) to 50C ( 122 F)
Working Humidity: <90%
MTBF >50,000 hrs
Net Weight: 1.9
Size (W x D x L): 4.8 x 1.8 x 10.5 inch
Operating Voltage: 12V DC at 0.3A
Power: 20 watt max
Notes for Operation:
Face verification is possible even when a person is wearing a protective mask but it is not as reliable as without the mask.
The temperature measuring device should be used in a room with a room temperature between 10 C -40C Do not install the temperature measuring device under the vent, and ensure that there is no heating source within 3 meters;
Personnel entering the room from a cold outdoor environment will affect the temperature measurement accuracy. The forehead temperature test should be performed after the forehead is unobstructed for three minutes and the temperature is stable;
The temperature read by the temperature measuring device is the temperature in the forehead area. When there is water, sweat, oil, or thick makeup on the forehead or the elderly have more wrinkles, the read temperature will be lower than the actual temperature. Make sure there is no hair or clothing covering this area.
Learn More About Temperature Scanning
To learn more about Temperature screening, look at our articles.
- Thermal Body Temperature Screening Cameras.
The article describes the pros and cons of temperature screening.
- Integrating Access Control and Temperature Screening
This article describes how to integrate the biometric temperature panel with other door access control systems
To help you stay safe, take a look at the contact tracing system that provides the automated health tracing required in today’s environment. The system provides accurate, reliable, and easy-to-implement contact tracing in the workplace. It keeps a record of all the people who come into contact with each other. It allows employers to safely bring their employees back to the office while reducing the risk of a future shutdown due to infected employees.