More Temperature Monitoring | More Biometric Door Access | Door Access Control Systems
The TVIP-FaceBioPro is a biometric door access control panel. The reader-controller recognizes faces, detects elevated temperature, and if a person is wearing a protective mask. It can measure the person’s temperature even if they are wearing a mask.
The network-attached reader-controller can be integrated with other access control systems and prevent people with elevated body temperature or no mask from entering a secure area.
This access control reader includes a Wiegand output so it can be connected to an access controller. It also has an input for an alternative reader, such as an RFID reader. The panel includes a network connection, output power for the electric lock, relay for door control, alarm inputs and outputs, and an Exit button control.
Its embedded face recognition sensor provides 100% hands-free hygienic user authentication.
This access reader-controller provides a safe way of screening people as they enter a secure area.
Its embedded face recognition sensor provides 100% hands-free hygienic user authentication while detecting elevated temperature or if the person is wearing a mask.
| Specification | Description |
| Capacity | Faces: 20,000 Face Recognition Distance: 0.98-6.56Ft (0.3m-2m) |
| Interface and Integration | Wiegand Controllers Access Control Software |
| Face Recognition Distance | 0.98-6.56Ft (0.3m-2m) |
| Height Range of Face Recognition | 3.93-7.21Ft (1.2m-2.2m) (the recommended installation height is 4.75ft/1.45m) |
| Temperature Measurement Capability | Temperature Distance: up to 2.5 ft Temperature Accuracy: +/- 0.3 °C (+/- 0.54F) Protective Mask Detection |
| Display | 8-inch LCD screen; resolution: 1280×800; contrast: 500:1 |
| Hardware | 2MP Camera with Color 0.01 lux, BW 0.001 lux 3D noise reduction, strong light suppression, electronic image stabilization, and has multiple white balance modes, suitable for various fields |
| Environmental | Working Temp.: 10C (50F) to 50C ( 122 F) Working Humidity: <90% |
| Mechanical | MTBF >50,000 hrs Net Weight: 1.9 Size (W x D x L): 4.8 x 1.8 x 10.5 inch |
| Power | Operating Voltage: 12V DC at 2.5A Power: 12-Watt |
| Certificate | CE, FCC |
| Dimensions | 11.88×5.45×1.34 In (301.8×138.6×34.2mm) |
| Weight | Approx. 1.2KG |
FaceBioPro-Software is available that provides management of multiple FaceBioPro panels. It also supports IP cameras.
The management software provides control and viewing of all the biometric Face recognition FaceBioPro panels. It includes configuration of panels, management of face credentials, integration with other panels and IP cameras on the network.
Software Management Product Sheet
Face verification and temperature measurement is possible even when a person is wearing a protective mask, but it is not as reliable as without the mask.
The temperature measuring device should be used in a room with a room temperature between 10 C -40C Do not install the temperature measuring device under the vent, and ensure that there is no heating source within 3 meters;
Personnel entering the room from a cold outdoor environment will affect the temperature measurement accuracy. The forehead temperature test should be performed after the forehead is unobstructed for three minutes and the temperature is stable;
The temperature read by the temperature measuring device is the temperature in the forehead area. When there is water, sweat, oil, or thick makeup on the forehead or the elderly have more wrinkles, the read temperature will be lower than the actual temperature. Make sure no hair or clothing is covering this area.
More Face Recognition Door Readers | Access Control Systems
To learn more about the pros and cons of temperature screening, look at our article, Thermal Body Temperature Screening Cameras.
To help you stay safe, take a look at the contact tracing system that provides the automated health tracing required in today’s environment.
The system provides accurate, reliable, and easy-to-implement contact tracing in the workplace. It keeps a record of all the people who come into contact with each other. It allows employers to safely bring their employees back to the office while reducing the risk of a future shutdown due to infected employees.