Batko Insulated Housing or Enclosure for IP Cameras

The Batko insulated housing is made for IP cameras with PoE capability (Power over Ethernet).

Batko provides insulated enclosures that don’t require power for a heater or blower. They are perfect for solar powered applicaitons where you have limited power available. With PoE you will only need to run the network wire to the camera so installation is simplified. Please contact us for help in selecting the right enclosure for your application.

This design has been tested since 1987 in severe Canadian subzero outdoor conditions, this rustproof, tamperproof, weatherproof, all aluminum, mineral fiber board insulated housing doesn’t need a heater (nor a blower) to keep the camera in good working order.

Lightweight, even if it is double-walled, this sealed housing includes a sealed connector to run in the cable. The front cover, that opens and extends horizontally for total camera access, is locked by 2 screws.

The window comes with a 3/16″ polycarbonate. See the specification below for more details.
Enclosures are ready for IP network cameras. It can be installed on any wall, ceiling or corner with the appropriate mounting bracket: FSM2012 for wall, FSP2012 for ceiling, FSC2012 for corner and FSA2012 for pole.

Batko Insulated Housing

Model FB-2008

Batko Insulated Housing

Wall Mount

Batko Insulated Housing

Ceiling Mount

Batko Insulated Housing

Pole Mount

Batko Insulated Housing

Corner Mount
Specifications Body Aluminum
Window 3/16” clear polycarbonate
Cover Sliding, sealed, locked by 2 screws
Finish White polyurethane coating
Weight 6 lb (2.7 kg)
External Dimensions (H x W x L) 6.75″ (171mm) x 6.75″(171mm) x 13.00″ (330mm)
Internal Dimensions (H x W x L) 4.0″ (102mm) x 3.75″ (95mm) x 8.0″ (203mm)
Operating Temperature – 40° ~+ 120° F

Other models are available. Please contact us for help in selecting the right enclosure for your application.