The biometric door reader-controllers have been upgraded to provide improved performance. We listed the upgrade suggestions for each type of biometric door reader.
Biometric access control readers detect a person’s unique physiological characteristics.
Biometric readers attach to the network or to a access controller and provide increased security. There are fingerprint IP door readers, finger vein IP door readers, facial recognition readers and multi-biometric readers that can read a number of different physiologic characteristics.
Multimodal biometric readers increase reliability, because if one metric doesn’t work then another will. The readers on this page have been replaced by new professional readers with much better reliability.
Multimode readers provide more than one access key to control the door. This includes RFID proximity credentials, pin numbers, and biometrics. What is the best type of reader for your application? Take a look at our door reader comparison guide. We describe the pros and cons of each type of multimode reader.
Select the Professional Reader | Overview of Biometrics | Buyers Guide | More Access Control Systems
These Fingerprint readers have been discontinued and replaced by the pro-series fingerprint readers. The new readers provide improved reliability.
Fingerprint readers detect the pattern of your fingerprint. The following readers also include RFID credential readers. Two of the models also include a keypad for entering a pin code.
TVIP18ID | TVIP1600 | TVIP1700
Reads fingerprints, RFID proximity credentials, and pin numbers. The reader Includes LCD display and keypad.
IP fingerprint reader that’s reliable, durable and highly accurate. This fingerprint sensor provides less than 1.5-second user recognition.
The fingerprint reader works even if the network is down. Complete setup and programming can be done via keypads and embedded firmware.
The graphical user interface on a 3.5 inch TFT display provides a rich user experience. Audio-Visual Indication for acceptance and rejection of valid/invalid fingerprints.
Relay outputs for electric lock and alarm. Inputs for door status sensor and exit switch. Supports multiple time zones and personnel groups for programming valid entry zones. The alarm will be triggered when the tamper switch is activated. Wiegand output for connecting to an access control panel and an Ethernet port for fast and reliable communication with the computer.
Optional RFID Mifare (smart card), HID formats.
Fingerprint, and RFID credential reader for outdoor use in wide temperature ranges.
Note that this IP reader doesn’t include a keypad so you require a separate enrollment reader that connects to the Windows computer.
Provides audio-visual indication for acceptance and rejection of valid/invalid fingerprints. Includes Relay Outputs for electric lock and alarm, and Inputs for door status sensor and exit switch.
This outdoor fingerprint reader supports multiple time zones and personnel groups for programming valid entry zones.
IP65 rated waterproof enclosure permits this reader to be used for outdoor applications.
Fingerprint reader, RFID credential reader, or pin number can be used in this outdoor reader. Operates in cold temperatures.
Audio-Visual Indication for acceptance and rejection of valid/invalid fingerprints.
Includes Relay for electric lock and alarm outputs. It also includes Inputs for door status sensor and exit switch.
The fingerprint reader supports multiple time zones and personnel groups for programming valid entry zones.
The special enclosure permits this reader to be used for outdoor applications. The IP reader is IP65 rated, waterproof and operates in cold temperatures.
This IP door facial recognition reader uses a special facial recognition algorithm, It can identify users from a database of 400 faces in less than one second.
Users can be identified from a distance of 12.5 feet with a built-in IR light source.
The cam300 combines IP video with door access control. It includes relay I/O connect, door sensor, electric lock, and REX hardware.
See this multimodal door access reader below
Multimode biometric readers include at least two physiological characteristics to increase reliability. This includes a unit that provides fingerprint and vein, another that includes facial recognition and fingerprint, and a third that includes facial recognition and body motion.
Fingerprint reader, and Vein Reader combination, as well as RFID credential reader and pin number. Finger vein readers are one of the most reliable readers since they read the unique vein pattern under the skin.
This is a multi-biometric reader that’s capable of capturing and processing finger vein and fingerprint biometric data at the same time.
The Finger vein reader captures an image of the vein patterns which exist beneath the surface of the finger. In this case, the vascular pattern is detected using a near-infrared LED. The system detects the hemoglobin in the bloodstream, providing a distinct pattern.
Ergonomic, intuitive and highly secured, this reader provides a new level of security with biometrics.
TVIP350ID Product specification
Provides multimode Facial recognition and Fingerprint IP Reader, with RFID and pin number options
This multi-biometric reader can Identify or verify users by their face, fingerprint, proximity card or PIN/Password…. or any combination, all conveniently from a single device. Built-in Infrared light source enables operation in dimly lit rooms. The MB700-ID works without a computer. Complete setup and programming can be done via keypads and embedded firmware.
Stunning 3-inch color TFT touch screen provides ease of use and rich user experience with intuitive and user-friendly GUI. Includes both voice and visual prompts which indicate the acceptance or rejection of fingerprint,
Can store up to 1500 faces, 2000 fingerprints, 10000 cardholders and 100,000 transactions. The data can be backed up to a USB flash drive and can also be transferred to another reader in the absence of computer connectivity. Relay Outputs for electric lock visitor bell and alarm. Inputs for door status sensor and exit switch.
Supports multiple time zones and personnel groups for programming valid entry zones. The Alarm will be triggered when the tamper switch is activated. Internal Proximity Card or Mifare Card reader allows triple factor authentication for access control.
Unfortunately, FST corporation is no longer in business. Take a look at the systems that identify a face in a crowd.
The FST biometric door access control system increased identification accuracy by adding full-body motion analytics to facial recognition. It could quickly identify authorized people as they approach the door. It gradually learned more about the person’s body motion becoming more accurate as time goes on.
Console software is included that allows you to enroll and administer all people using the system.
This sophisticated identification system is the latest in biometric recognition.
More …
TVIP-Access is a Windows administration and control software that comes with the readers. The software manages all the standard Biometric IP readers (except the FSTBM-AC reader). It does not support the Pro-series biometric readers. For pro-reader support see TVIPTIRSoft software.
TVIP-Access is designed to manage all TVIP Access control IP readers, except the Pro panels.
The software can manage access control as well as generate reports such as attendance reports.
This is very easy to use software with a simple interface that makes it very easy to enroll new users, monitor door activity, and remotely control doors.
Software product specification
Need help selecting the right biometric reader, please contact us at 1-800-431-1658 in the USA, or at 914-944-3425 everywhere else, or use our contact form.